Adquisiciones: The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')

>20 adquisiciones archivadas

The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy') ha sido históricamente un comprador de servicios de arquitectura, construcción, ingeniería e inspección, servicios de ingeniería y servicios de ensayo, análisis y consultoría técnicos.
Históricamente, los proveedores de The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy') han sido Alphysica GmbH, Constructions Industrielles de la Méditerranée, Idom Ingeniería y Consultoría S.A.U., Indra Sistemas S.A., Tebex S.A., A. Silva Matos Metalomecânica, S.A., Air Liquide Advance Technologies SA, Air Liquide Engineering, Air Liquide Global E&C Solutions France S.A. y Air Liquide Global E&C Solutions France SA.

Adquisiciones recientes de The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')

2020-06-24   Provision of Bespoke Electronic Integration and Manufacturing Services (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this procedure is the provision of services in areas related to electronics hardware development and integration: analogue and digital design, mechanical integration, product qualification to ITER applicable standards, small volume production optimisation, preparation of test rigs and production testing, and any other activity required to procure a fully ITER compliant electronic component. Ver la contratación »
Proveedores mencionados: Alter Technology Tüv Nord GTD Science, Infrastructure and Robotics
2019-08-27   Provision of Interim Services to Fusion for Energy (F4E) in France (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Multiple framework service contract in cascade with maximum 2 contractors for the provision of interim support service to Fusion for Energy in France (Cadarache). Ver la contratación »
Proveedores mencionados: Proman 042 SAS Robert Half International France SAS
2019-07-24   Provision of Technology Brokerage Services to Fusion for Energy (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The objective of this call for tender is to conclude a framework service contract for the total maximum duration of 4 years for the provision of technology brokerage services aimed at encouraging the commercial use of Fusion for Energy technology packages by the European Industry in the market. The services shall consist of 3 main activities, being: 1) Building a portfolio of Fusion for Energy technology packages composed of Intellectual property rights, Information and/or skills used and/or developed … Ver la contratación »
Proveedores mencionados: In Extenso Innovation Croissance SAS
2019-06-20   Provision of Medical Centre Services to Fusion for Energy in Barcelona (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The purpose of this call for tenders is to conclude a single framework service contract for the provision of medical centre services to Fusion for Energy in Barcelona. Ver la contratación »
Proveedores mencionados: Centro de Exámenes Médicos, S.A.
2018-10-03   Provision of Medical Services (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Medical services with the aim to prevent any risk on occupational health matters and to carry out the functions and obligations attributed to the Contracting Authorities by the staff regulations. Ver la contratación »
Proveedores mencionados: Gabinete Servicios médicos de Empresa y Prevención Tebex S.A.
2018-05-02   Provision of Network Communication Services to Fusion for Energy (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Fusion for Energy wishes to sign a Framework Service Contract with the successful Tenderer (Contractor) for a maximum total duration of 48 months for the provision of the following services: — dedicated network communication services between the premises of F4E in Barcelona, Spain and a second location (the premises of EUIPO in Alicante, Spain and/or those of ITER IO in St. Paul-lez-Durance, France), — internet services to be installed at a specific location (the premises of F4E in Barcelona, Spain … Ver la contratación »
Proveedores mencionados: Vodafone España SAU
2015-06-15   F4E-OMF-641 Multiple framework contract in cascade for the provision of schematic CAD design support services (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this contract is the provision by the contractor/supplier of support services to F4E in the preparation, checking, analysis and integration in ITER environment product lifecycle management (PLM) of piping and instrumentation diagrams (P&IDs), process flow diagrams (PFDs) and electrical diagrams. In addition, the contractor/supplier shall provide training on the use of CAD software both to F4E staff and to third parties. Ver la contratación »
Proveedores mencionados: Arial Industries (leader) with CT3 Ingeniería S.L
2015-06-08   Provision of system, instrumentation and control engineering support (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Supply of services in the field of instrumentation and control system engineering. The support services will be ordered by F4E by means of task orders. The tender is organised into 2 lots: lot 1 limited to supporting F4E in the area of conventional I&C procurement and lot 2 focused on the design of nuclear safety I&C systems. Ver la contratación »
Proveedores mencionados: Amec Foster Wheeler Nuclear France SAS Vitrociset S.p.A.
2015-06-03   Procurement for high heat flux testing of first wall semi-prototypes (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this contract concerns high heat flux (HHF) testing of semi-prototypes (SPs) of the ITER first wall which are manufactured by a fabrication route where bonding between the different materials is obtained by using the HIPping technology. Ver la contratación »
Proveedores mencionados: Alphysica GmbH
2015-04-24   Neutral beam test facility: support for site supervision (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Engineering, consultancy and legal services, mainly related to work on site supervision works and compliance with applicable laws for health and safety during on-site activities on an Italian site. Ver la contratación »
Proveedores mencionados: Consortium led by NIER Ingegneria S.p.A.... URS Italia S.p.A.
2015-04-09   Engineering support in the area of remote handling (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The framework contract will cover the provision of engineering support in the field of remote handling, including engineering of mechanical, electrical, electronics and control systems linked with remote handling systems and components. The framework contract will be implemented through specific task orders for self-standing activities which will be placed over the duration of the framework contract. These activities include: a) industrial evaluation of remote handling concepts and solutions, including … Ver la contratación »
Proveedores mencionados: Assystem Engineering and Operation Services SAS James Fisher Nuclear Ltd Oxford Technologies Ltd
2015-03-10   PF coils cold test facility (ref.: F4E-OPE-585) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this call for tender is the engineering, provision, installation, acceptance testing and maintenance of the PF coils cold test facility. The ITER poloidal field coils will be cold tested in a facility in the east side of the PF building. Those tests are considered as a final acceptance test of the coil. The cold test facility aims at performing the cold test according to the requirements agreed with IO such as the cooling rate, the temperature of the cold test, etc. The main components of … Ver la contratación »
Proveedores mencionados: Criotec Impianti, s.r.l
2015-01-30   Supervision and health and safety support to F4E for on-site installation and commissioning activities under the... (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The supplier will provide the services of ‘on-site health and safety consultant' (OSH & SC) in support to the F4E Safety Officer for each task order that will be concluded. For each task order, the work consists of providing support and consultancy to the F4E Safety Officer in preparation and during the activities of on-site installation, commissioning and testing of systems and components procured under the responsibility of F4E in the frame of the Broader Approach Agreement. Ver la contratación »
2014-12-23   ITER PF coils manufacturing and cold test (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this contract covers the whole manufacturing cycle of the PF coils PF2, PF3, PF4, PF5, including the material purchasing (excluding the free issue items from F4E), some standard equipment, the coil manufacturing, the in-process controls up to final acceptance tests and cold testing. PF6 coil will be shipped from another contractor and shall only be cold tested by the manufacturing contractor. The contract scope also includes the manufacturing and testing of fabrication qualification models … Ver la contratación »
Proveedores mencionados: Constructions industrielles de la...
2014-12-19   Site infrastructure works (TB16) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
1. Execution design, procurement and construction of the following: — concrete service trenches (galleries), — precipitation drainage, — special foundations. 2. Execution design with manufacturing documentation for the installation of cooling water buried networks. 3. Site adaptation works (execution design, procurement and construction). 4. Geotechnical investigation and engineering (G3 mission, NF P94-500). Ver la contratación »
Proveedores mencionados: Consortium composed of Spie Batignolles... Consortium composed of Spie Batignolles... Consortium composed of Spie Batignolles...
2014-12-18   Mitica cryogenic plant (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Mitica is an experiment located in the PRIMA facility, Padua, Italy. F4E is supplying a cryoplant to provide helium at either 4 K or 80 K to test a neutral beam injector for ITER. The scope of supply includes: — preliminary and final design of the complete cryogenic plant, — procurement and production of all the cryogenic plant components and equipment, — factory testing and control of all components and equipment for the cryogenic plant, — packing, transport, delivery, supervision of unloading and … Ver la contratación »
Proveedores mencionados: Air Liquide Advance Technologies SA
2014-11-07   Emergency electrical power distribution (TB13) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of the contract includes the delivery of electrical, nuclear qualified protection important components (PICs) (also referred to as safety important component (SIC)) distribution equipment and buildings associated with that equipment. The scope of the contract is broken down in the following activities: 1. construction design, delivery, installation, commissioning and maintenance of the following electrical equipment: — PIC electrical distribution equipment, — 15 kV equipment for back-up from … Ver la contratación »
2014-10-24   Acceleration grid power supply conversion system (AGPS-CS) and ground-related power supplies (GRPS) — (F4E-OPE-278) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Design, manufacture, factory testing, delivery, assembly, installation and commissioning on site of: — the acceleration grid power supply conversion system (AGPS-CS), — the ground-related power supplies (GRPS). The technical specifications will be at functional level. Ver la contratación »
Proveedores mencionados: Energy Technology Srl Nidec ASI S.p.A.
2014-10-24   Provision of Medical Services for Fusion for Energy 3 Lots (Lot 1: Medical Centre; Lot 2 Medical Advice; Lot 3... (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The purpose of this Call for Tenders is to conclude three framework contracts (one per lot): — Lot 1 "Medical Centre": provision of services of a medical centre for mainly pre-recruitment tests, annual checks and health screening checks. — Lot 2 "Medical Advice": provision of services of a medical advisor for Fusion for Energy providing advice on occupational health issues. Furthermore, the medical advice shall provide support to the Staff on various medical issues. — Lot 3 "Medical Controller": … Ver la contratación »
Proveedores mencionados: Creu Blanca Centro de Exámenes Médicos Tebex S.A. UTE Preving SME gabinete de servicios...
2014-10-17   Independent concrete testing (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
This procurement procedure aims to obtain the provision of independent concrete testing and related services on the mix concrete trials performed by the 'construction contractor' under supervision of the engineer throughout the construction phase of the ITER project until final completion of the concrete phase of safety important, reinforced concrete buildings. Ver la contratación »
2014-09-17   PF impregnation tooling (TI) and additional tooling (TA) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this call for tender is: — the supply of the impregnation plants and all of their pertaining ancillary apparatus and system for the vacuum pressure impregnation processing of the single double pancakes and of the winding packs for the PF2, PF3, PF4 and PF5 coils of the ITER superconducting poloidal field magnets. The impregnation plant also includes the provision of supports and moulds of the components to be impregnated, — the supply of all the additional tools, including the gantry crane, … Ver la contratación »
Proveedores mencionados: ELYTT Energy SL, Alsyom SAS, SEIV SAS
2014-09-04   F4E-OMF-0578 Engineering support services in the area of thermo-hydraulic and fluid dynamic analysis (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The services to be provided by the contractor concern analysis and optimisations for several ITER structures, systems and components (SSC) under compressible and incompressible regimes in order to evaluate the compliance with technical or functional requirements. Particularly, the services relate to the planning, preparation, execution, evaluation, reporting and checking of analysis and calculations involving fluids (liquids and gases) in several areas, including thermo-hydraulics and fluid dynamics. Ver la contratación »
Proveedores mencionados: Frazer-Nash Consultancy Limited Idom Ingeniería y Consultoría S.A.U. NIER Ingegneria–EnginSoft
2014-08-29   Site infrastructure works (TB14) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The contract is for site infrastructure works. These works comprise the performance of the execution design, procurement and construction of the following: Concrete service trenches (galleries): — internal dimensions (width in mm x height in mm) ranging from: smallest 2 200 x 1 650, largest 2 700 x 5 500 and 4 300 x 2 850, — average thickness of the walls: 300 mm, — length of service trenches to be implemented: 3 000 lm. Precipitation drainage: — concrete pipe works. Special foundations: — reinforced … Ver la contratación »
2014-07-31   Provision of design activities for the design of the cooling plant for the 4 electron cyclotron upper launchers (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Design activities of the cooling components both inside and outside of the ITER vacuum vessel. In particular it includes: (1) the design of the cooling water distribution system of 4 electron cyclotron upper launchers; (2) the design of the cooling water distribution system of electron cyclotron equatorial launcher; (3) the design of the water manifold for the cooling of all the EU gyrotron components and gyrotron auxiliaries. Ver la contratación »
Proveedores mencionados: Iberdrola Ingeniería y Construcción SAU
2014-07-11   Engineering support for joining and testing procedures used in the manufacturing of ITER components (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Provision of engineering support services related to joining and testing procedures used for manufacturing of ITER components. The application area for these activities includes: documentation review, literature studies, consultancy, modelling/engineering assessments, process qualification and/or validation, mechanical-chemical-structural testing, failure analysis and also includes R&D tasks related to joining or testing procedures. Ver la contratación »
Proveedores mencionados: Centro Sviluppo Materiali (CSM) Instituto de Soldadura e Qualidade (ISQ) TWI Limited VTT Technical Research Centre of Finland
2014-06-20   Provision of material characterisation at cryogenic temperatures (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
This contract concerns the provision of services of material characterisation at cryogenic temperatures. Material characterisations and microscopic inspections are needed in order to support the construction and development of components and materials for ITER and other fusion-related facilities under the responsibility of F4E, in particular the ITER and JT-60SA reactor's magnet systems, cryoplant and cryopumps. Ver la contratación »
2014-06-04   PF coils site, infrastructure and facilities management (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The current scope concerns the provision of site, infrastructure and facility management services for the PF manufacturing building on the ITER site in Cadarache, where the fabrication of the poloidal field coils PF2-5 and the PF6 cold-testing will take place. The site, infrastructure and facility management supplier, the contractor, will take over, furnish (including installation of clean areas), maintain and operate the PF building, the technical buildings, the office building and the surrounding … Ver la contratación »
Proveedores mencionados: Dalkia Dalkia-Veolia Consortium
2014-05-22   Multiple framework contracts in cascade for the development and supply of the ITER cask and plug remote handling... (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Preliminary design, prototyping, final design, manufacturing, assembly, delivery, commissioning and in-site acceptance testing of the ITER cask and plug remote handling system. Estimated total value of the contract: 80 000 000 EUR. Ver la contratación »
Proveedores mencionados: Airbus Defence and Space S.A.S. Constructions Industrielles de la...
2014-05-02   Manufacturing of Continuous External Rogowski (CER) coils for ITER (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this contract is to provide services and supplies to complete the manufacturing design, the manufacture, the factory acceptance testing, the shipping and the provision of technical assistance for site acceptance testing of the Continuous External Rogowski coil (CER) for ITER. The CER is a two-layer Rogowski coil with a 12 mm outer diameter. It includes fibreglass insulation and a flexible, braided metallic sheath. The coil is approximately 30 m long, and built in 2 halves. It includes … Ver la contratación »
Proveedores mencionados: Axon' Cable S.A.S. (group leader) and...
2014-04-29   Provision of sample characterisation during the production of NbTi strands to be used in ITER PF conductors (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The PF system consists of 6 independent coils (PF1 to PF6) with different dimensions, but all pancake-wound using two-in-hand NbTi-based cable-in-conduit conductors (CICC). The coils are composed of stacks of double pancakes (DPs). Each DP is wound with two-in-hand CICC and consists of a top and bottom layer. Each continuous section of CICC used in the two-in-hand winding is referred to as a unit length (UL). The CICC for the PF coils of ITER relies on twisted, multifilament, nickel-plated, NbTi-based … Ver la contratación »
Proveedores mencionados: Durham University
2014-04-29   Competitive framework qualifying suppliers for the procurement of the ITER full tungsten divertor (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The supply of small scale W monoblock mock-ups, medium scale full W plasma facing units, 1 full scale inner vertical target prototype. Ver la contratación »
Proveedores mencionados: Atmostat/Alcen Constructions Industrielles de la Méditerranée Research Instruments GmbH
2014-04-15   Supply of MITICA vacuum vessel (F4E-OPE-0520) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this tender is the supply of the vacuum vessel, its support structure and the rear lid handling system for the MITICA experiment and their installation at PRIMA site. Please refer to the F4E Industry & Association portal to download the invitation to tender documents at https://industryportal.f4e.europa.eu/default.aspx Ver la contratación »
Proveedores mencionados: De Pretto Industrie
2014-03-26   Planning and scheduling support services (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Provision of planning and scheduling services to support the existing F4E planning and scheduling team in the performance of their activities. The services will concern specific tasks related to the development and maintenance of Oracle Primavera project schedules and will be in conformity with the terms provided in the tender specifications and the quality and technical requirements set out in the technical specification. Ver la contratación »
Proveedores mencionados: BCF Solutions Indra Sistemas S.A. Primakon d.o.o.
2014-03-20   Quality assurance and surveillance support inspectors for the ITER project (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Lot 1: a) supporting the QA/QC follow-up of procurement contracts and grant agreements by resident, itinerant and spot surveillance inspectors to be deployed at F4E suppliers' and subcontractors' premises; b) implementing QA activities at F4E premises by supporting F4E QA officers in their work (e.g. review of QA plans, support to F4E units on internal QA procedures, review of QA documents, etc.). Lot 2: a) supporting the QA/QC follow-up of procurement contracts and grant agreements of items defined … Ver la contratación »
Proveedores mencionados: Bureau Veritas France Instituto de Soldadura e Qualidade — ISQ Intertek Ibérica Spain S.L.U.
2014-03-18   Procurement of reference raw materials for ITER components (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The supply of raw materials, based on ITER references, which will be used for manufacturing mock-ups or samples used in various types of tests. The contract is divided into lots based on the material classification: — lot 1 — stainless steel, — lot 2 — copper and alloys, — lot 3 — nickel alloys, — lot 4 — titanium alloys, — lot 5 — W (tungsten). Ver la contratación »
2014-03-14   Provision of support services to the F4E dual use export control compliance programme (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Provision of support services to the F4E dual use export control compliance programme. The services will concern specific tasks related to the set-up and maintenance of the dual use export control compliance programme, support to the F4E officer in preparation of audits on export control compliance, delivery of training and provision of expertise on export control national legislations, and will be in conformity with the terms provided in the tender specifications and the quality and technical … Ver la contratación »
Proveedores mencionados: Alter Technology TÜV Nord S.A.U. FCC Advisory B.V. i.o. (Full Circle Compliance) PwC EU Services EESV
2014-03-04   Supply of helium gas transfer lines for the warm regeneration system of the ITER vacuum system (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
This technical specification defines the technical requirements for helium gas transfer lines for the warm regeneration system for the ITER cryogenic pumps. These lines consist in approximately 560 m of double-wall flexible lines with an inner process line and outer vacuum insulation jacket and related tees, hangers, bolts, seals, etc. The scope of supply includes the final design, manufacturing and delivery of the lines. Ver la contratación »
Proveedores mencionados: Criotec Impianti S.r.l.
2014-02-17   Seismic, dynamic and structural analyses of ITER buildings and mechanical components (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Provision of structural analyses, technical support and expertise to assess and/or improve the design of ITER building and mechanical components and analyse them against seismic and dynamic loads, also during the construction phase of ITER facility. Ver la contratación »
Proveedores mencionados: Empresarios Agrupados Internacional S.A. Enel Ingegneria e Ricerca S.p.A. Esteyco S.A.P. Idom Ingeniería y Consultoría S.A.U.
2013-12-16   JT-60SA TF coil replacement forged material (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
This technical specification concerns the supply of a number of forged blocks for the manufacturing of the JT-60SA toroidal field coil casings. The materials required are 36 large forged blanks (1 790 x 1 560 x 280 mm), and 41 small forged blanks (350 x 380 x 480 mm), both rough-machined. The blanks must be manufactured from 316L stainless steel, with narrowed-down chemical composition requirements, assurance of material ductility at cryogenic temperatures, total absence of non-austenitic phases, forging … Ver la contratación »
2013-10-28   F4E-OPE-0522 Gaseous helium storage vessels (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of this contract is to design and manufacture 6 identical pressure vessels for the storage of gaseous helium, with 250 m volume each and including their support structures. The vessels will have to be delivered to Japan. For further details please see specifications point 4.1. Ver la contratación »
Proveedores mencionados: A. Silva Matos Metalomecânica, S.A.
2013-09-04   F4E-OPE-517 Technical support to Fusion for Energy to monitor the design, manufacturing and qualification of a high... (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Provision of technical support services to assist Fusion for Energy (F4E) in monitoring the implementation of a separate contract (F4E-OPE-319) that will provide F4E with the design, manufacturing and qualification (or commissioning) of a high heat flux (HHF) test facility (TF) for ITER in-vessel components (IVCs). The contractor shall perform the following stages/tasks: stage 1: review of the engineering, manufacturing and commissioning documentation of OPE-319; stage 2A: monitor the TF manufacturing, … Ver la contratación »
Proveedores mencionados: AREVA NP
2013-07-18   Provision of nuclear analysis (F4E-OMF-0466) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The services to provide are nuclear analyses. Please refer to the Annexes A and B of the tender specifications available at: https://industryportal.f4e.europa.eu/default.aspx The framework contract will be implemented by specific task orders for self-standing activities which will be placed during the course of the framework contract. Ver la contratación »
Proveedores mencionados: AMEC Nuclear UK Limited Karlsruhe Institute of Technology/ENEA The United Kingdom Atomic Energy Authority
2013-07-17   ITER poloidal field coils winding tooling 1 (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The current scope concerns the winding tooling supply of the poloidal field coils of EU in-kind contribution for the ITER machine magnet system: PF2 & PF5, and, PF3 & PF4. The contractor will: — perform the detailed and manufacturing design, manufacture, installation on-site and commissioning of the tooling, — train the manufacturing personnel and other project-related personnel in the use of the tooling, — support and maintain the equipment throughout the course of the PF coil project (the 'project'), — … Ver la contratación »
Proveedores mencionados: SEA ALP Engineering Consortium
2013-07-15   Electromagnetic and electromechanical analysis of ITER components (F4E-OMF-0508) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of the contract is to provide electromagnetic and electromechanical analysis of different ITER components and support to improve already existing electromagnetic models. In particular the main scope of the contract is the electromagnetic analysis of ITER components under fast and slow electromagnetic transients. For some task orders the supplier will be requested to perform the subsequent coupled mechanical analysis of the component under study subject to electromagnetic forces. Please refer to … Ver la contratación »
Proveedores mencionados: Create — Consorzio di Ricerca per... Elytt Energy S.L Numerical Analysis Technologies S.L.
2013-07-05   Superconducting magnet system for the European gyrotron prototype for the ITER electron cyclotron system (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
This technical specification concerns the detailed manufacturing design and analysis, electrical schematics and mechanical assembly drawings, control and monitoring system, procurement of materials, fabrication and assembly, factory tests, packaging and delivery, on-site installation, and on-site acceptance tests for the supply of a superconducting magnet system to be used as part of the European development programme for the development of the EU gyrotrons for ITER. The superconducting magnet system is … Ver la contratación »
2013-07-02   Provision of metrology support services (F4E-OMF-0468) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The services to provide are metrology support services. Please refer to the Annex B of the tender specifications available at: https://industryportal.f4e.europa.eu/default.aspx The framework contract will be implemented by specific task orders for self-standing activities which will be placed during the course of the framework contract. Ver la contratación »
Proveedores mencionados: G2 Métric SAS SETIS Groupe Degaud EURL VMT GmbH
2013-06-14   Provision of irradiation and post-irradiation characterisation of materials for development of Fusion for Energy... (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The scope of the supply is to provide a service activity on irradiation and post-irradiation characterisation of materials and joints including the characterisation of non-irradiated materials (reference tests) to compare the data. This supply concerns the irradiation and testing at the level of material specimens. Transport services of irradiated material specimens between facilities shall also be included if applicable. Testing of larger scale components, mock-ups or sub-assemblies shall be excluded … Ver la contratación »
Proveedores mencionados: Nuclear Research and Consultancy Group (NRG) Studsvik Nuclear AB TÜV Rheinland Industrie Service GmbH
2013-05-03   Multiple framework contracts in cascade for the development and supply of the ITER in-vessel viewing and metrology... (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
Preliminary design, prototyping, final design, manufacturing, assembly, delivery, commissioning and in-site acceptance testing of the ITER IVVS. Estimated total value of the contract: 20 000 000 EUR. Ver la contratación »
Proveedores mencionados: Bertin Technologies SAS Constructions Industrielles de la Méditerranée Tecnatom S.A.
2013-04-12   Supply of CuCrZr plates for the ITER first wall panel HIP manufacturing route (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The procedure contains 3 identical lots and the aim is to sign 1 contract per lot. Each lot concerns the supply of 2 CuCrZr plates, fabricated in accordance with the technical specifications annexed to the call for tender documents. Ver la contratación »
2013-04-11   Provision of mechanical analyses of ITER components (F4E-OMF-0457) (The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy'))
The services to provide are mechanical analyses, mainly finite element model (FEM) calculations. Please refer to the Annexes A and B of the tender specifications available at: https://industryportal.f4e.europa.eu/default.aspx The framework contract will be implemented by specific task orders for self-standing activities which will be placed during the course of the framework contract. Ver la contratación »
Proveedores mencionados: IDOM Ingeniería y Consultoría S.R.S. Engineering Design
Búsquedas relacionadas 🔍
Región: España Este Cataluña Barcelona
Proveedores: Alphysica GmbH Constructions Industrielles de la Méditerranée Idom Ingeniería y Consultoría S.A.U. Indra Sistemas S.A. Tebex S.A. A. Silva Matos Metalomecânica, S.A. Air Liquide Advance Technologies SA Air Liquide Engineering Air Liquide Global E&C Solutions France S.A. Air Liquide Global E&C Solutions France SA
Productos/servicios: Servicios de arquitectura, construcción,... Servicios de ingeniería Servicios de ensayo, análisis y... Máquinas, aparatos, equipo y productos... Maquinaria industrial Servicios de investigación y desarrollo y... Maquinaria para producción y uso de... Reactores nucleares y sus partes Equipo y aparatos eléctricos Servicios de inspección y ensayo técnicos