Adquisiciones: The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’)

>20 adquisiciones archivadas

The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’) ha sido históricamente un comprador de servicios de arquitectura, construcción, ingeniería e inspección, servicios de ingeniería y máquinas, aparatos, equipo y productos consumibles eléctricos; iluminación.
Históricamente, los proveedores de The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’) han sido Assystem Engineering and Operation Services SAS, ARIAL Industries SAS, DAHER Technologies SAS, Deloitte Consulting S.L.U., Forschungszentrum Jülich GmbH, IDOM Consulting Engineering Architecture SAU, Jacobs Clean Energy France SAS, JEMA Energy SA, Nier Ingegneria S.p.A. y Research Instruments GmbH.

Adquisiciones recientes de The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’)

2021-03-26   Supply of the JT-60SA Centrifuge Accelerator (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Supply of a centrifuge and guiding tube. Operating under vacuum, the centrifuge will accelerate pellets of cryogenic hydrogen ice which are dropped into its centre. The pellets must be guided from the centrifuge exit using a guide tube, also under vacuum. Among others the system has interfaces with the pellet sources, flight speed measurement unit and overall control system. Ver la contratación »
2020-12-14   Diamond Window Unit Prototypes (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
This call for tender concerns the manufacturing, assembling and testing of two diamond window unit prototypes. These prototypes will be a proof of concept as previous step before starting the qualification process of the component (outside of the scope of this procurement). Ver la contratación »
Proveedores mencionados: Gutmar S.A.
2020-12-11   Supply of the Error Field Correction Coils Power Supplies (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
This is the re-launch of F4E-OPE-1117 following its cancellation. The contract concerns the design, manufacturing, and testing of error field correction coils power supplies, their delivery to Japan and their installation and commissioning on site. Ver la contratación »
Proveedores mencionados: Equipaggiamenti Elettronici Industriali (EEI) SpA
2020-10-27   Auditing Services for ‘Cost Plus Fee’ Contracts (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Provision of contract audit services for the determination of the actual incurred cost under ‘Cost Plus Fee’ supply contracts OMF-900-01 and OMF-900-02, for the production of the ITER Blanket First Wall Panels. Ver la contratación »
Proveedores mencionados: Deloitte Advisory S.L. Pricewaterhousecoopers Auditores S.L.
2020-09-17   Tokamak Complex Doors Completion (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Provision of heavy nuclear doors and confinement and shielding doors. Ver la contratación »
Proveedores mencionados: FERROVIAL CONSTRUCCIÓN S.A. SOMMER...
2020-09-16   Supply of an Upgraded LEBT/RFQ Interface (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Supply of the of complete interface between the LEBT and the RFQ within the IFMIF/EVEDA project. Ver la contratación »
Proveedores mencionados: Expleo Region SAS
2020-09-16   Supply of the Electron Cyclotron RF Power Supply (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The contract concerns the design, manufacturing and testing of the electron cyclotron RF power supply for two gyrotrons and optionally the manufacturing and testing of additional PS for other two gyrotrons, their delivery to Japan and their installation and commissioning on-site. Ver la contratación »
Proveedores mencionados: JEMA Energy SA
2020-09-16   Supply of Spare Accelerator Column for LIPAc (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Supply of the spare accelerator column for LIPAc within the IFMIF/EVEDA project including design and fabrication activities. Ver la contratación »
2020-06-29   Development and Delivery of Final Design for ITER Core Plasma Thomson Scattering System (CPTS), Charge-eXchange... (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Please refer to below section II.2.4) (‘Description of the procurement’). Ver la contratación »
Proveedores mencionados: Assystem Engineering and Operation Services SAS AVS Added Value Industrial Engineering... Bertin Technologies SAS Idom Consulting, Engineering, Architecture, S.A.U.
2020-06-19   Final Design and Supply of In-Divertor Electrical Services (IDES) and Supply of In-Vessel Supports (IVS) for Mineral... (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of the procedure includes design services (for In-Divertor Electrical Services (IDES) components), pre-manufacturing services, hardware procurement, manufacturing activities, testing activities, cleaning, packaging and delivery. IDES provides electrical infrastructure for diagnostic sensors located in the Divertor Cassettes. Such infrastructure comprises of cabling, electrical junction boxes and connectors (including a connector that will be manipulated by remote means). Overall 16 sets need to … Ver la contratación »
2020-06-02   Supply of the HE Leak Localisation Systems for ITER (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Design, procurement, manufacturing, assembly, testing and delivery to ITER site of the helium leak localisation system for ITER, which comprises: — in pipe inspection tool (IPIT), — magnet feeder vacuum gauges system. Ver la contratación »
Proveedores mencionados: Danieli Telerobot Labs SURL
2020-05-29   Hot Helium Leak Testing (HHLT) Services for First Wall Components (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Provision of Hot Helium Leak Testing (HHLT) services for mock-ups, prototypes, pre-series panels and, possibly, final models of the European Normal Heat Flux First Wall Panels (EU-NHF FWP). Scope of the Baseline part (task 0): definition of the test set-up, design and manufacturing of required support structures, procurement of the required adapters and fittings, qualification of the testing facility and performance of the Hot Helium Leak Testing of the first item. Subsequents task orders will provide … Ver la contratación »
Proveedores mencionados: PVA Industrial Vacuum Systems GmbH Thales Alenia Space France SAS
2020-05-11   Supply of Divertor Cryopumps (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of supply comprises the manufacture of: — 10 cryopump units each comprising: • panels, chevron baffles and base plates, • supply and return lines surrounded by a thermal shield, • supports including fasteners, • heaters and associated cables, • temperature sensors and associated cables; — custom tools and fixtures for transport and for installation of the cryopump units at the QST site Set of spares required for disassembly and assembly (e.g. replaceable components like screws, nuts, washers, … Ver la contratación »
Proveedores mencionados: Research Instruments GmbH
2020-05-04   Destructive and Non-destructive Testing of Materials and Mock-ups at Room and Elevated Temperatures (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of the supply are services to support manufacturing and R&D activities in the frame of ITER and other fusion projects under responsibility of F4E which will consist of material and mock-up characterisations at room and elevated temperatures, inspections and non-destructive testing of materials. Such services will also include, planning, preparation, manufacturing of specimens, execution, evaluation and reporting of specified characterization or inspection tasks. The storage and, in some cases, … Ver la contratación »
Proveedores mencionados: Instituto de Soldadura e Qualidade Jacobs Clean Energy France SAS
2020-03-24   Design, Procurement, Installation, Test and Commissioning of the Radiological Environmental Monitoring System (REMS)... (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The envisaged contract is related to the Radiological Environmental Monitoring System (REMS) which serves as a part of a broader ITER system functioning to ensure that occupational exposures (ionizing radiation and beryllium) to workers and potential exposures to members of the public and environment are within regulatory limits and are maintained ‘as low as reasonably achievable’ (ALARA) during the whole life of ITER, from construction through operation and decommissioning. Following the decision to … Ver la contratación »
Proveedores mencionados: Jacobs Clean Energy France SAS
2020-02-21   Provision of CAD Design Support Services (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The main aim of this framework contract is the provision of CAD design support services in the fields of: — mechanical and plant design (Lot 1), — dimensional variation analysis (Lot 2), and — schematics (Lot 3). Ver la contratación »
Proveedores mencionados: Arial Industries ARIAL Industries SAS Assystem Engineering and Operation Services SAS Ausy SA CITD Engineering & Technologies SL CT Ingenierie Sud Est SAS CT Ingenieros de Catalunya AAI SL Expleo Iberia SLU
2020-02-20   Supply of Polychromators for JT-60SA Thomson Scattering (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Supply, calibration, delivery and on-site installation of the polychromators for the JT-60SA Thomson scattering system. Ver la contratación »
Proveedores mencionados: G.N.R. SRL
2020-01-15   Service Framework Contract for a Logistic Provider for Broader Approach (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
This service framework contract is for a logistics provider to arrange for fusion for energy the transport of any conventionally-sized package under the BA agreement: — within Europe, — from Europe to Japan, and — from Japan to Europe. Ver la contratación »
Proveedores mencionados: DAHER Technologies S.A.
2019-12-19   Engineering Services in the Area of Remote Handling (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of the services is related to engineering and prototyping (manufacturing) activities foreseen to be implemented over the duration of the framework contract to support the development of the various ITER Remote Handling Systems related to the European in-kind procurement. When ITER is not in operation, specific maintenance activities are performed by remote handling systems that are able to cope with the ITER environmental conditions, in particular radiation due to nuclear activation. Ver la contratación »
Proveedores mencionados: Ansaldo Nucleare SpA ARIAL Industries SAS ARTELIA SAS Assystem Engineering and Operation Services SAS ONET Technologies CN SAS
2019-12-13   High Heat Flux Test Services for In- Vessel Components (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Preparation and performance of the high heat flux (HHF) testing of: — ITER Blanket First Wall Components (Lot 1), — Inner Vertical Target Test Assemblies (Lot 2). Order of magnitude of the tests to be executed: 8 (6 for Lot 1 and 2 for Lot 2) Ver la contratación »
Proveedores mencionados: Forschungszentrum Jülich GmbH Institution Project Center ITER
2019-12-10   Procurement for Manufacturing and Testing of Transition Pieces and RH Flanges for ITER Divertor Cassette Body (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of this procurement is the supply of the Transition Pieces (TP) and Remote Handling (RH) Flanges of the ITER divertor cassette body made of stainless steel materials.The scope of the supply encompasses the procurement of a prototype and 120 TP, a prototype and 130 RH flanges and additional raw material. The order of magnitude of the scope is as follow: Supply of — TCWS Transition pieces: a prototype and 120 pieces in 1 4404 (316L) Tube, — RH Flanges: a prototype and 130 pieces in 316L(N)-IG … Ver la contratación »
Proveedores mencionados: Walter Tosto S.p.A
2019-10-24   Engineering Support in the Area of Seismic, Dynamic and Structural Analyses of ITER Buildings and Mechanical Components (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The envisaged framework contract (3 in cascade) is to provide engineering support in the area of seismic, dynamic and structural analysis of ITER buildings and mechanical components, more precisely covering: planning, preparation, execution, evaluation, reporting and checking of analysis and calculations involving seismic loads, transient dynamic loads or other accidental loads for ITER buildings and mechanical components. The support services will be ordered by Fusion for Energy under the framework … Ver la contratación »
Proveedores mencionados: Esteyco, S.A. IDOM Consulting Engineering Architecture SAU Mott MacDonald Bulgaria EOOD
2019-10-09   JT-60SA Pacing Pellet Source (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The contract is for the supply of hydrogen ice extruder with 100 mm/s capacity with integrated 50 Hz pellet cutter, observation unit and refrigeration system. Ver la contratación »
2019-10-02   Series Production of the Normal Heat Flux (NHF) ITER Blanket First Wall (FW) Panels (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Supply of the normal heat flux first wall panels for the ITER blanket system. The supply involves qualification, manufacturing, factory testing, delivery and witnessing of the final acceptance testing of the panels at the ITER site. Ver la contratación »
Proveedores mencionados: Alsyom S.A.S Atmostat S.A.S Empresarios Agrupados Internacional, S.A. Framatome S.A.S Leading Metal Mechanic Solutions, S.L
2019-09-27   JT-60SA Fuelling Pellet Source (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The contract is for the supply of deuterium ice extruder with 350 mm/s capacity with integrated 20Hz pellet cutter, observation unit and refrigeration system. Ver la contratación »
Proveedores mencionados: Pelin LLC
2019-09-20   Supervision and Support to F4E on Health and Safety Matters for On-site Installation and Commissioning Activities... (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
This is the framework contract for supervision and support to F4E on health and safety matters for on-site installation and commissioning activities for broader approach, including the IFMIF/EVEDA project in Rokkasho (Japan) and the JT60SA project in Naka (Japan). Ver la contratación »
Proveedores mencionados: Bureau Veritas Japan Co. Ltd
2019-09-02   Provision of Instrumentation and Control Integration Services (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The subject of the contract is the provision of services as set out in the technical specification and in conformity with the terms provided in the procurement documents. The envisaged framework contract (2 in cascade) will provide I&C integration services to F4E. These services will range from the implementation of the interface between industrial supplied systems and ITER CODAC, to the development of the complete control systems of a plant. The support services will be ordered by F4E under the … Ver la contratación »
Proveedores mencionados: Cosylab, Laboratorij za Kontrolne Sisteme, d.d. GTD Science, Infrastructures and Robotics, S.L.U.
2019-07-30   Gyrotron Commissioning Components (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The Gyrotron Commissioning Components (GCC) will be used to perform the commissioning and the site acceptance tests of the gyrotrons delivered to ITER. The GCC comprise a set of transmission lines and mitre bends with an internal diameter of 50 mm and an internal corrugation compatible with the transmission of a HE1,1 mode at 170 GHz. The waveguides connect the Matching optical unit (MOU) of each Gyrotron to a calorimetric Dummy Load for the dissipation and measurement of the power produced by the … Ver la contratación »
2019-07-16   Supply of the Primary Vacuum and Cryostat Leak Detection Systems for Iter (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of the resulting contract is the design, procurement, manufacturing, assembly, testing and delivery to ITER Site of the primary vacuum and cryostat leak detection systems for ITER consisting in: (a) primary vacuum leak detection system — torus direct leak detection system, — neutral beam direct leak detection system, — remote leak detection system which comprises: —— torus remote leak detection station, —— neutral beam remote leak detection station, —— active SVS remote leak detection … Ver la contratación »
Proveedores mencionados: 40-30 SAS Gutmar SA IDOM Consulting, Engineering, Architecture SAU
2019-06-13   Civil Works for B14 — Tritium Building (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Completion of the B14 — tritium building. Ver la contratación »
Proveedores mencionados: Ferrovial Agroman SA GTM Sud SAS Razel Bec SAS Vinci Construction Grands Projets SAS
2019-05-21   Complementary Health Insurance Services to Fusion for Energy Staff and their JSIS Family Members (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The purpose of this call for tenders is to conclude a framework service contract in cascade with (up to) 3 tenderers that must provide complementary health insurance services ensuring a broad access to hospitals, clinics and doctors while covering a broad range of specialties and types of medical services. Ver la contratación »
Proveedores mencionados: Sanitas Sociedad Anónima de Seguros
2017-12-18   Project management services (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of this procurement is the conclusion of framework contracts for project management services. The contractor shall provide suitably qualified and experienced persons in the execution of specific contracts. Three different lots are the subject of this procurement: Project performance management, risk and opportunities management and planning support. Ver la contratación »
Proveedores mencionados: Altran Technologies SA BCF Solutions France SARL Deloitte Consulting S.L.U. Mott MacDonald Ltd Vulcain Services SAS
2017-10-13   JT-60SA TFC air freight (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Transport of 2 toroidal field coils for JT-60SA from CEA Saclay by air to an airport in Japan. Includes an option for the onward transport of the coils to QST Naka (final destination). Ver la contratación »
Proveedores mencionados: DAHER Technologies SAS
2017-10-09   Provision of software acquisition channel (SACHA III) to Fusion for Energy (F4E) (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Framework supply contract with a single economic operator for the provision of a software acquisition channel for Fusion for Energy. The contract will be concluded for a period of 24 months, renewable once for an additional period of 24 months, with a total maximum duration of 48 months (4 years). Ver la contratación »
Proveedores mencionados: CAD TECH Ibérica S.A.
2017-10-02   Provision of engineering support services (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The subject of the contract is the provision to Fusion for Energy of engineering support services in the fields of mechanical, electrical, systems, design and civil engineering. Ver la contratación »
Proveedores mencionados: 3TI Progetti Italia - Ingenieria Integrata SpA Active Space Technologies SA IDOM Consulting Engineering Architecture SAU Instituto de Soldadura e Qualidade PCUP Latesys SAS Tractebel Engineering SA
2017-09-27   Multilink inspection tool (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Procurement for the fabrication and supply of a metrology tool suitable to perform the metrology survey of the divertor cassette body hinges. Ver la contratación »
Proveedores mencionados: FUNDACIÓN TEKNIKER
2017-08-03   JT60SA toroidal field magnet — spare TF coil 21 (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The contract is for the supply of the JT60SA toroidal field magnet — spare TF coil 21. The contract will be divided in 2 lots: — lot 1: the manufacture of a complete TF coil winding pack, including all room temperature works acceptance tests. The deliverable of this activity is the complete TF coil winding pack, fully works acceptance tested at room temperature, ready for delivery EXW at the manufacturer's premises, — lot 2: the embedding of the TF coil winding pack into a TF coil casing, the final … Ver la contratación »
Proveedores mencionados: ASG Superconductors SpA
2017-07-13   Manufacturing of plasma position reflectometry (PPR) in-vessel prototypes (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The items to be supplied under this contract comprise of the following prototypes of in-vessel components for the plasma position reflectometry (PPR) system: copper (Cu) coated waveguides (4 types, each with a different geometry or curvature) and flanges. The scope of the contract includes development of manufacturing dossier, preparation for manufacture, manufacture, factory acceptance testing, packaging and shipping. Please refer to technical specification (Annex B) for further details. Ver la contratación »
Proveedores mencionados: Swissto12 SA
2017-07-12   Provision of interim services to Fusion for Energy (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Framework service contract in cascade with 2 contractors per lot, for the provision of interim support service to Fusion for Energy. The services requested with this tender are divided per lot, per place of delivery: lot 1: provision of interim services to F4E in Spain; lot 2: provision of interim services to F4E in France; lot 3: provision of interim services to F4E in Germany. Ver la contratación »
Proveedores mencionados: Adecco TT Empresa de Trabajo temporal SA Proman Expansion S.A.S. Randstad Empleo, ETT, SAU
2017-06-15   Tender batch 11: finishing and retrofit works for the Tokamak complex, assembly hall and all surrounding buildings (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The subject of the framework contract is the provision of works as set out in the technical specification (Annexes B and B-01) and in conformity with the terms provided in the invitation to tender, the general tender conditions and the management specifications. The framework contract is composed of a baseline scope, i.e. the finishing works and retrofit works for the Tokamak complex, the assembly hall and all surrounding buildings and structures (galleries, bridges and trenches) as set out in Annex B-01 … Ver la contratación »
Proveedores mencionados: Dalkia S.A. Veolia propreté industrie service
2017-06-13   Flexible connectors for the coaxial lines of the SRF Linac for the IFMIF/EVEDA LIPAc (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The contract is for the supply of 8 flexible coupling elements that will connect the RF coaxial line to the couplers of the SRF Linac (also called cryomodule). Ver la contratación »
2017-06-07   Final design and supply of the Torus and Cryostat cold valve boxes part of the ITER front-end cryopump distribution... (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The subject of the contract is the provision of the final design of the cold valve boxes and warm regeneration box part of the ITER front-end cryopump distribution system (FECDS) and all its components, namely: a. 8 cold valve boxes (CVBs) for Torus and Cryostat and 4 neutral beam cold valve boxes including platforms; b. design and qualification of protection important components (cryovalves, pressure relief valves and burst discs); c. 1 warm regeneration box (WRB); d. all related cryolines, cryovalves, … Ver la contratación »
Proveedores mencionados: RI Research Instruments GmbH
2017-05-25   Mechanical analyses of ITER components (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
This procurement procedure is for the award of multiple framework contract(s) in cascade with a maximum of 2 contractors, for the provision of mechanical analyses and technical support of ITER components. The services are divided in 2 lots: lot 1: advanced mechanical analyses; lot 2: general mechanical engineering design analysis. Ver la contratación »
Proveedores mencionados: CITD Engineering & Technologies IDOM Consulting, Engineering Architecture S.A.U. IDOM Consulting, Engineering Architecture SAU Principia SAS SRS Engineering Design SRS Servizi di Ricerche e Sviluppo
2017-05-23   Engineering support services for JT-60SA TF coils part 2 (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
This subject of the contract is the provision of engineering support service to correct minor manufacturing imperfections or design oversights of the TF coils. Such services may be required in any location at the QST Naka site in Japan. Ver la contratación »
Proveedores mencionados: Nippon Advanced Technology Co Ltd
2017-04-27   Cryostat vessel body cylindrical section transport to Japan (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The subject of the contract is the transport of 12 sectors of the cryostat vessel body cylindrical section, 2 lifting tools and the leftover stainless steel material from the manufacturing company in Spain to Japan. Ver la contratación »
Proveedores mencionados: DAHER Technologies SAS
2017-04-26   Development and supply of software algorithms for ITER magnetics diagnostic (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
Magnetics diagnostics on tokamaks (e.g., ITER) provide local measurements of the magnetic field and large area measurements of magnetic flux close to the surface of the plasma. Combinations of these measurements are processed to determine a variety of plasma parameters, such as its position, shape or the electrical current it carries, in both static and a range of dynamic conditions. Some of the plasma parameters are determined in real time for plasma control applications while others are determined off … Ver la contratación »
2017-04-20   Procurement of ITER-grade copper chromium zirconium plates (CuCrZr-IG) (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The procedure involves 2 distinct tasks: task 1 is the supply of a number of CuCrZr-IG plates. Task 2 concerns the fabrication of CuCrZr-IG samples for the purposes of demonstrating compliance with material specifications. Ver la contratación »
Proveedores mencionados: Albaksan Alassimli Bakir Societa Metallurgica Minotti Yamato Gokin Co Ltd
2017-03-17   Project management systems support (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The scope of this procurement is the conclusion of framework contracts for project management systems support. Fusion for Energy's Project Management (PM) Department administrates a number of third-party PM systems. These are used in providing PM support to F4E's project teams. The services provided by these framework contracts will be to administrate, develop and configure these systems. The 3 systems subject of this procurement are Oracle Primavera, SAP Business Objects and EcoSys EPC. Ver la contratación »
Proveedores mencionados: Deloitte Consulting S.L.U. PricewaterhouseCoopers Asesores de Negocios Primakon d.o.o. Seidor — Societat d'estudis informatics i...
2017-03-10   Manufacturing of prototypes of the supports of the blanket cooling manifold system and application of coatings on... (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
The subject of the procedure is the manufacture and supply of prototypes of pipe supports of the blanket cooling manifold (BCM) system. The scope of supply also includes the coating with alumina and MoS of pieces of pipes (to be assembled with the support) and of pads belonging to the FW panels. Ver la contratación »
Proveedores mencionados: Traitements Composites Poudres et Process SARL
2017-02-23   Provision of information and communications technology (ICT) development services to Fusion for Energy (The European Joint Undertaking for ITER and the development of Fusion Energy (‘Fusion for Energy’))
In the context of the implementation of the annual ICT work programs with specific relation to development, integration and maintenance of enterprise ICT software platforms, F4E will be required to periodically contract specialist development services to provide support in the relevant technical domains. This tender is divided into 3 lots: — lot 1: development services on a time and means basis, — lot 2: SAP business objects/business intelligence-related services on a time and means basis, — lot 3: … Ver la contratación »
Proveedores mencionados: Deloitte Consulting Slu Indra Sistemas SA Informática El Corte Inglés PNMSoft UK Limited Seidor SA Unisys SLU
Búsquedas relacionadas 🔍
Región: España Este Cataluña Barcelona
Proveedores: Assystem Engineering and Operation Services SAS ARIAL Industries SAS DAHER Technologies SAS Deloitte Consulting S.L.U. Forschungszentrum Jülich GmbH IDOM Consulting Engineering Architecture SAU Jacobs Clean Energy France SAS JEMA Energy SA Nier Ingegneria S.p.A. Research Instruments GmbH
Productos/servicios: Servicios de arquitectura, construcción,... Servicios de ingeniería Máquinas, aparatos, equipo y productos... Maquinaria industrial Servicios a empresas: legislación,... Equipo y aparatos eléctricos Estructuras y materiales de construcción;... Servicios TI: consultoría, desarrollo de... Equipos de refrigeración y ventilación Partes de equipos refrigeradores y...